Windows 8.1 32-Bit / 64-Bit - Bosch FWA 4650 Initial Operation And Retrofit Kit

Wlan-box for 3d-12cam wheel alignment system
Hide thumbs Also See for FWA 4650:
Table of Contents

Advertisement

Available languages

Available languages

en
80 | FWA 4650 | Configuring network
!
The IP address of the "wireless network link" must
be changed to the valid value.
1. Select the "Use following IP address" item.
2. Change the IP address in the "IP address" input field
to the valid value to configure/activate the WLAN
network adapter.
Valid network address
192.168.150.1
Tab. 28:
Valid/invalid network address
3. Confirm with the "OK" button.
Close the Network link window.
4.
 WLAN network link configured.
Re-start the PC/Laptop.
5.
6.
Perform sensor assignment.
i
For sensor position assignment, refer to the
document Commissioning instructions 1690706006.
"
This completes start-up of the WLAN-Box.
|
1 690 706 220
2016-09-14
10.2.2

Windows 8.1 32-bit / 64-bit

1. Click onto the "Windows" symbol into the taskbar
with the right mouse key.
2. Select in the menue "Network Connections".
 "Network Connections" window opens up:
Fig. 84:
Network Connections
WLAN-Network Connection
3. Click onto "WiFi" network link with the right mouse
key.
4. Select the "Properties" menu item.
 The "Properties of WLAN-Easy 3D" window opens
up:
Fig. 85:
Wireless network link properties
1 Menu item "Internet Protocol Version 4 (TCP/IPv4)"
2 "Properties" button
5. Select the "Internet Protocol Version 4 (TCP/IPv4)"
item.
6. Click onto the "Properties" button.The "Properties of
internet protocol (TCP/IPv4)" window opens up:
Robert Bosch GmbH

Advertisement

Chapters

Table of Contents
loading

Table of Contents