Preparation For Installation; Scope Of Delivery; Qualifications; Measurement Bay - Bosch FWA 4650 Initial Operation And Retrofit Kit

en 48 | FWA 4650 | Preparation for installation
4.

Preparation for installation

4.1

Scope of delivery

i
The scope of delivery varies depending on the
version.
1. Unpack the WLAN-Box.
2. Check the scope of delivery against the delivery slip.
"
This completes checking of the scope of delivery.
4.2

Qualifications

!
Commissioning of the WLAN-Box must be performed
by qualified service personnel.
4.3

Measurement bay

i
Further information on the measurement bay
can be found in the document Commissioning of
FWA 4650 1690706006.
1. Check the level of the measurement bay.
2. Adjust the level if necessary.
"
This completes checking of the measurement bay.
4.4

Platform/pit adapters

Adapters for attaching the sensors to a lifting platform
or pit.
i
For further information on the platform adapters,
refer to the following documents:
$
Fitting platform adapters (elevated) 1690706010.
$
Fitting platform adapters (under-floor)
1690706009.
$
Fitting pit adapters 1690706011.
¶
Fit the platform/pit adapters.
"
This completes fitting of the adapters.
4.5

Sensors

i
For further information on attachment and wiring of
the sensors, refer to the document Commissioning
of FWA 4650 1690706006.
1. Attach the sensors to the measurement bay.
2. Wire up the sensors.
"
This completes attachment and wiring-up of the
sensors.
|
1 690 706 220 2016-09-14
4.6

Trolley

i
For further information on start-up of the
trolley, refer to the document Commissioning of
FWA 4650 1690706006.
1. Start up the trolley.
2. Connect the Bluetooth and WLAN adapter USB
extension cables (2 x) to a PC/ Laptop.
3. Route the USB extension cables out of the trolley.
"
This completes start-up of the trolley.
4.7

Software and drivers

i
When commissioning wheel alignment units with
a manufacturer's PC/ Laptop, the user software
(measurement program, vehicle target data and
drivers) is already installed and configured.
i
When commissioning with a customer PC/ Laptop
or when retrofitting the WLAN-Box, the software +
drivers have to be installed and configured.
i
The software + drivers can be found on the
following:
$
Measurement program CD
$
Vehicle target data DVD
$
Driver CD
$
USB data carrier (licence key)
i
The following drivers have to be installed for
operation of the hardware components in
conjunction with FWA 4650:
$
WLAN adapter
$
Bluetooth adapter
$
USB hardlock
i
The hardware components have to be connected
before or during driver installation when prompted
by the software:
Hardware Connection
components prior to
software
installation
WLAN adapter -
Bluetooth -
adapter
√
USB hardlock
Tab. 10: Connection sequence for hardware components and
storage locations
!
Heed the connection sequence for the components.
Connection Storage
during location
installation
√ Driver CD
When
prompted
√ Driver CD
When
prompted
-
Measurement
program CD
Robert Bosch GmbH