Preparation; Avm Fritz!Wlan Driver Installation - Bosch FWA 4650 Initial Operation And Retrofit Kit

Wlan-box for 3d-12cam wheel alignment system
Hide thumbs Also See for FWA 4650:
Table of Contents

Advertisement

Available languages

Available languages

6.2.2

Preparation

!
There must not be any other 3D-12Cam wheel
alignment devices switched on during installation
and configuration.
Ending programs
1. Close the program user interface "Aligner".
2. Use the right mouse key to select the program
modules Measurement server, RemoteControlEx,
ILSV server, Demo server and Licence server in the
task bar at the bottom right and end with the "Exit"
button.
Fig. 17:
Server task bar
1 Measurement server
2 RemoteControlEx
3 ILSV server
4 Demo server
5 Licence server
i
Depending on program version:
3. Close any open programs.
 Programs ended.
Robert Bosch GmbH
Installing WLAN adapter | FWA 4650 | 57
6.2.3

AVM FRITZ!WLAN driver installation

1. Following the GUI-PC start-up, insert the
FRITZ!WLAN USB adapter into a free USB2 port on
the PC.
 A dialog box appears, installation of driver is be-
ing announced.
2. Confirm dialog box within 1 minute.
!
Note that the confirmation will follow within 1
minute.
i
Once the dialog box closes automatically, remove
the WLAN USB adapter and insert again.
3. Confirm dialog box with "yes".
 Installation starts automatically.
4. Click on "close" in the dialog box.
5. Right-click on the WLAN tray icon and select "Open
Network and Sharing Center".
en
|
1 690 706 220
2016-09-14

Advertisement

Chapters

Table of Contents
loading

Table of Contents