Placing The Rack-Mounted 33E/8B Or 36E/8C System Into The Service Position Or Operating Position; Placing The 33E/8B Or 36E/8C In The Service Position - Bull ESCALA Power7 Series Manual
Disk drives or solid-state drives
Hide thumbs
Also See for ESCALA Power7 Series:
- Site and hardware planning (302 pages) ,
- Common service procedures (200 pages) ,
- Manual (184 pages)
Table of Contents
Advertisement
Figure 91. Installing the service access cover
Placing the rack-mounted 33E/8B or 36E/8C system into the service
position or operating position
Use these procedures to place a system into the service position or operating position to perform service
or to gain access to internal components.
Placing the 33E/8B or 36E/8C in the service position
Use this procedure to perform service or gain access to internal components by placing the rack-mounted
system or expansion unit in the service position.
About this task
Note: Some of the figures in these procedures might not look exactly like the system or expansion unit
that you have. However, the steps to perform the task are the same.
108
Disk drives or solid-state drives for the 33E/8B or 36E/8C
Advertisement
Table of Contents
