Mix Chamber Removal, Inspection, Cleaning - Maguire Products S-BLENDER Supplimental Documentation

Maguire S Blender

Mix Chamber Removal, Inspection, Cleaning

The Mix Chamber is accessible though the Front
Door Assembly. The Front Door Assembly is
secured to the frame assembly with 2 latches. The
upper half of the Front Door Assembly is keyed into
a Safety Interlock Switch.
1. To open the Front Door Assembly, un-latch the
upper latch and pull the upper half of the door from
the Safety Interlock Switch. Folding at the hinge,
lower the upper door so that it rests against the
lower half of the door.
2. Un-hook the lower door latch and swing open the
Front Door assembly.
The Mix Blade shaft will detach from the Mix Shaft
Collar located on the inner side of the Front Door
Assembly.
3. Remove the Mix Blade from the Mix Chamber.
6
Maguire Products, Inc.