Description; Product Characteristics - Siemens SIMATIC NET PS598-1 Compact Operating Instructions

3

Description

3.1

Product characteristics

Connectors
Type Power
PS598-1 300 W
Note
Two connectors for the 24 VDC output voltage
The PS598-1 has two connectors with the output voltage 24 VDC. Note that you can
only use one connector on the front or the connector on the rear of the PS598-1. You
cannot operate the device with the connectors on the front and rear at the same time.
Note
Requirement for connecting at the rear
Note that the connector on the rear of the PS598-1 can only be used if the power
supply is mounted on the SCALANCE XR500.
Components of the product
The following parts make up the components of the PS598-1:
● 4-pin terminal block for the 24 VDC power supply.
● 2 mounting brackets
● 8 screws (M3 x 6 countersunk, drive: Torx) for mounting the fixing brackets for
19" rack installation
● Compact Operating Instructions
4
Input voltage
100 to 240 VAC
Power supply unit PS598-1 for SCALANCE XR500
Output voltage
24 VDC
A5E03275848-04, 05/2013