Siemens SIMATIC NET PS598-1 Compact Operating Instructions page 23

● Keep to the installation guidelines
The product meets the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation
when installing and operating the product.
● You can always find the latest documentation on the Internet
The current descriptions of the currently available products can always be found
on the Internet under the specified entry IDs/Internet pages:
– SIMATIC NET Industrial Ethernet Network manual
ID = 27069465
(http://support.automation.siemens.com/WW/view/en/27069465)
– EMC Installation Guideline, Planning Guide
ID = 28518276
(http://support.automation.siemens.com/WW/view/en/28518276)
– Working on the product
To protect the product from electrostatic discharge, personnel must first
discharge any electrostatic charge from their body before touching the
product.
Note
The product was tested with a device that also complies with the standards
listed above.
If the product is operated with a device that does not meet these standards,
there is no guarantee that the corresponding values will be adhered to.
Low voltage equipment directive
Devices supplied with 100 to 240 VAC meet the requirements of the directive
2006/95/EC "Electrical Equipment Designed for Use within Certain Voltage Limits"
(Low Voltage Equipment Directive). Conformity attested by compliance with the
standard EN 60950-1:2010.
cULus Approval for Information Technology Equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
● UL 60950-1 (Information Technology Equipment)
● CSA C22.2 No. 60950-1-03
Power supply unit PS598-1 for SCALANCE XR500
A5E03275848-04, 05/2013
Approvals
21