How To Use Bluetooth In Your Car Audio - Axis AX-902 Installation Manual

HOW TO USE BLUETOOTH IN YOUR CAR AUDIO

How to Perform Pairing
Before dialling out from the car stereo, PAIRING must first be performed.
Pairing is a procedure used to connect  Bluetooth devices together.
1. Press and hold SEL button for  seconds.
. Press SEL button repeatedly until "PAIRING" displays.
. Press and hold SEL button to engage pairing mode. "PAIRING" blinks on the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform "Add Bluetooth device" from your mobile
phone. The mobile will search for any Bluetooth devices within the range. Select "CAR BLUETOOTH"
and enter Passkey: "0000" to connect to the car audio.
5. The LCD will display "PAIRED" when successful.
Note:
• If "DISCONN" shows instead of "PAIRING", it means the head unit currently is paired with another
device. Press and hold SEL button to disconnect the connection and perform steps above again.
• "CAR BLUETOOTH" is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.
Switching to Telephone Mode
1. During any operation mode, press and hold "*" to activate TELEPHONE mode.
Press and hold it again to return to previous mode.
Making Calls Using the Remote Control
Before making calls directly from the remote control ensure that the devices are properly paired and con-
nected.
1. Press and hold "*" on remote control. Unit will switch to phone mode.
. Enter the phone number via the remote control keypad and press
Press bbutton to make corrections when entering numbers.
. Press bbutton to end call.
Audio Streaming
If your phone is "ADP" format compatible, then you can play music in your mobile and the sound will
be transferred to the vehicle's sound system.
1. Mobile phone and the head unit must be properly paired and connected.
. Play the music through your mobile music player software.
. Continuously press MODE until "BT-PLAY" appears in the display. The sound will transfer to the head
unit.
Answering / Hanging Up
To answer a call, press the
Once you have finished your conversation, press the
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make calls.
"OUT NUM" – outgoing calls made through the remote control.
1. Press and hold (*) then press and hold SEL button for  seconds. "OUT NUM" displays.
. Press and hold SEL button again.
. Rotate volume knob to search for entries and press
"IN NUM" – incoming calls received.
1. Press and hold (*) then press and hold SEL button for  seconds.
. Press SEL button repeatedly until "IN NUM" displays.
. Press and hold SEL button again.
4. Rotate volume knob to search for entries and press
button on the remote control.
11
button to dial out.
button to hang up.
to call.
to call.