Control Panel Installation - Kohler VEIL WALL FACED Installation Instructions Manual

2. Turn the screw clockwise to increase the water level by +5mm.
Place the water inlet vavle in its original position.
H. Control panel installation
1. Slide water splash plate into Slot A and B in square cover.
NOTE: After the splash plate is installed, the locators should be under the
surface.
I. Top Button installation
1. When locating the four locknuts on supporting board,
adjust to OPEN mark, as shown.
Kohler Co. Jan 2018
Fig.#28
Snap in position
Locators
Fig.#29
Fig.#30
15
Square cover
Slot B
Water
splash
plate
Slot A
Locknut
Fixing lock
Supporting board
1345889-A02-A