Table of Contents
Advertisement
Note: 1. Following the steps: 2B. Discharge pipe installation
method before fixating the tank.
2. Ensure that the tank remains level and plumb.
3. Keep the outlet pipe of the water tank upright. Do not
bend it.
注： 1. 水箱固定前排污管安装步骤 2B：排污管安装方法。
2. 水箱保持水平和竖直方向的平衡。
3. 保持水箱冲水管的竖直，不要折弯。
2B. Discharge pipe installation method
2B. 排污管安装方法
1. Insert the inlet pipe and drainage pipe into the bowl, and
then adjust the outlet pipe and drainage pipe to a proper
position to be fixated into the bowl. Check the positions of
outlet pipe and discharge elbow and then remove the bowl.
1. 如图将进水管和排污管装入座便器，然后调整冲水管及排污
管到合适位置后装入座便器，以确定冲水管及排污弯管的位
置，拆下座便器。
2. Following the steps: 1B. Discharge pipe installation method.
2. 按照步骤：1B. 排污管安装方法。
2C. Following the steps: 1C. Connecting the
water pipe
2C. 按照步骤：1C. 供水管连接
2D. Connecting cable to socket
2D. 插座接线
As shown, connect the pre-arranged power line to the socket
(K-32790T-*WP, Packed in tank), then fixate the socket with
two screws on the socket installation position.
如图所示，将预留的电源线与插座（K-32790T-*WP，水箱包装
内提供） 安装好， 再将插座用两颗螺丝固定在插座的安装位置上。
Note: K-32785TW-HC, K-32790K-HC, K-32616MY-HC do not
provide socket. The fixed socket needs to be prepared
separately at the socket installation position as shown.
注： K-32785TW-HC、K-32790K-HC、K-32616MY-HC 没有插
座，如图插座安装位置需要单独准备固定插座。
2E. Following the steps: 1E. Installation of
reserved access panel
2E. 按照步骤：1E. 预留检修口安装
1476533-K2-A
Discharge Elbow
排污弯管
Cable
电线
-24-
Spirit Level
水平尺
Tank
水箱
Outlet Pipe
冲水管
Outlet Pipe
冲水管
Inlet Pipe
进水管
Drainage Pipe
排污管
Suggested Socket
Installation Position
插座建议安装位置
90±2
Socket installation position
插座安装位置
Socket (K-32790T-*WP, Packed in tank)
插座 （ K-32790T-*WP ， 水箱包装内提供）
Screw (K-32790T-*WP, Packed in tank)
螺丝 （ K-32790T-*WP ， 水箱包装内提供）
Advertisement
Table of Contents
