For Your Information - DEVA Broadcast DB91-TX Setup Instructions

How can the db91-tx be used as an rtp sender, sending audio to db91-rx decoder used as an rtp receiver

Hide thumbs Also See for DB91-TX:

9. Go to Settings> IP Audio;

10. Then in IP Audio Sender 1/2/3 section - specify Encoder from the drop-down menu;

11. Select RTP Sender from the drop down menu;

12. Specify URL, IP Address or Multicast group IP address, and Port of the RTP Receiver to

be used;

13. Press [Save].

FOR YOUR INFORMATION:

group of hosts in a computer network, that are available to process datagrams or frames intended

to be multicasted for a designated network service.

Multicast works in a local network or any other network that is specially set/configured. For

more information as regards how a multicast network could be set, please refer to your network

administrator.

For detailed information and instructions on how communication with the DB91-TX can be

established, please refer to

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

A multicast address (Mcast group) is a logical identifier for a

"Appendix A - DB91-TX Quick User Guide" on page

- 6 -

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

Table of Contents