DEVA Broadcast DB91-TX Setup Instructions page 7

How can the db91-tx be used as an rtp sender, sending audio to db91-rx decoder used as an rtp receiver

Hide thumbs Also See for DB91-TX:

DB91-RX RTP RECEIVER SET-UP

1. Go to Settings> IP Audio;

2. RTP Receiver section - Specify the audio player Port;

3. Specify Decoder to be used;

4. Set Gain;

5. Set Pre-buffer;

6. If needed, specify Multicast group IP address;

7. Press [Save];

FOR YOUR INFORMATION:

group of hosts in a computer network, that are available to process datagrams or frames intended

to be multicasted for a designated network service.

Multicast works in a local network or any other network that is specially set/configured. For

more information as regards how a multicast network could be set, please refer to your network

administrator.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

A multicast address (Mcast group) is a logical identifier for a

- 7 -

Tel: +359 56 820027, Fax: +359 56 836700

Table of Contents