Page 3
- For XIBU senseDISINFECT dispensers only: You should ensure that your mounting and use of the XIBU senseDISINFECT dispenser complies with national or local fire code safety regulations. For HAGLEITNER senseMANAGEMENT devices only NOTE: This equipment has been tested and found to comply with the limits for a Class A digital de- vice, pursuant to part 15 of the FCC Rules.
Page 4
NOTICE Do not install the dispenser above a mirrored surface and maintain the minimum instal- lation dimensions in order to prevent unnecessary activation of the dispenser 337 mm (13.27 in) 241 mm (9.49 in) 100 mm (3.94 in) 90 mm (3.54 in) 50 mm (1.97 in) 80 mm (3.15 in) 40 mm (1.57 in)
Page 5
Option 247 mm (9.72 in) 270 mm 239 mm (10.63 in) (9,41 in) 3–5 mm (0.12–0.2 in) CAUTION Before drilling the holes, make sure there are no pipes or wires located behind the wall NOTICE Only mount on flat surfaces...
Page 6
IMPORTANT Insert screws and ensure that the dispenser is level before tightening completely...
Page 10
CAUTION Please verify that the correct product is used NOTICE Do not remove the co- ver of the vacuumBAG. The lid is automatically positioned and opened when placed in the dispenser...
EC-DECLARATION of CONFORMITY The distributor: Company Hagleitner Hygiene International GmbH Lunastraße 5 5700 Zell am See declares under our sole responsibility that the entire system XIBU sense FOAM / DISINFECT Type: Dispenser Mach. Nr.: 035 / P0041 Year of manufacture: 2018...
Need help?
Do you have a question about the XIBU senseFOAM and is the answer not in the manual?
Questions and answers