Chicago Pneumatic CPF 270 Instruction Book page 43

Instruction book
.
• Press the Enter button; a red selection bar is covering the first item (Ethernet).
• Using the Scroll keys, move the cursor to the setting to be modified (e.g. Ethernet) and press the Enter
button (1).
• A pop-up screen appears. Use the ↑ or ↓ key to select the required parameter and press the Enter key to
confirm.
Regulation settings
This menu allows to view and modify the regulation settings; see section Modifying the setpoint.
General settings
• Select the General settings icon as described above and press the Enter button (1). Following screen
appears:
2920 1796 01
Screen for Ethernet settings
Screen for CAN settings
41