Disconnect all cables connected to the underside of the personality board assembly.
6.
Remove the personality board assembly.
7.
To replace the component, reverse the removal procedure.
System board
To remove the system board:
Power down the node (on page 21).
1.
Remove the node from the chassis
2.
Remove the access panel (on page 23).
3.
Remove the processor air baffle
4.
Remove all DIMMs ("DIMMs" on page 27).
5.
("Remove a node from the
("Processor air
baffle" on page 28).
chassis" on page 22).
Removal and replacement procedures 38