Table of Contents
Advertisement
5
Display the [Other] tab, and perform logo file import
and other operations.
The setting items will vary depending on your printer.
[High Speed Print] (UP-D25MD only)
Select whether to enable high-speed printing.
When [Use] is selected, the print speed is increased
but the quality is reduced.
The default setting is [Use].
[Import Watermark] (UP-DR80MD only)
Import a watermark file.
Copy the watermark file onto a USB memory device,
and insert the device into a USB port on the unit.
For details on preparing a watermark file, see "To
prepare a watermark file" (page 73).
When you select [Import Watermark] and press the
ENTER button, a message requesting that you insert
media appears. Select [OK] and press the ENTER
button.
When import of the watermark file is complete, a
notification message will appear.
[Import Logo]
Import a logo file.
Copy the logo file onto a USB memory device, and
insert the device into a USB port on the unit.
For details on preparing a logo file, see "To prepare
a logo file" (page 73).
When you select [Import Logo] and press the ENTER
button, a message requesting that you insert media
appears. Select [OK] and press the ENTER button.
When import of the logo file is complete, a
notification message will appear.
6
When you finish configuration, select [Apply] and
press the ENTER button.
The configurations are saved, and the [Device 1] tab
appears again.
To prepare a watermark file
To print watermarks, prepare a watermark file that can be
imported to the unit and copy it onto a USB memory
device beforehand.
1
Prepare the watermark file.
The watermark file must meet the following
conditions.
• For A4 size paper
File format: 24-bit bitmap
File name: watermark_A4.bmp
Size: 2392 × 3400 pixels
Color:
Background: RGB (255, 255, 255) (white)
Watermark: RGB (0, 0, 0) (black)
• For letter size paper
File format: 24-bit bitmap
File name: watermark_85x11.bmp
Size: 2464 × 3192 pixels
Color:
Background: RGB (255, 255, 255) (white)
Watermark: RGB (0, 0, 0) (black)
2
Copy the watermark file onto a USB memory device.
Create a folder with the following name in the
uppermost directory of the USB memory device, and
copy the watermark file.
Folder name: Watermark
To prepare a logo file
To print logos, prepare a logo file on the unit and copy it
onto a USB memory device beforehand.
1
Prepare the logo file.
The logo file must meet the following conditions.
• For the UP-D25MD
File format: 24-bit bitmap
File name: printlogo_UP-D25MD.bmp
Size: 70 (height) × 320 (width) pixels
• For the UP-DR80MD
File format: 24-bit bitmap
File name: printlogo_UP-DR80MD.bmp
Size: 94 (height) × 900 (width) pixels
2
Copy the logo file onto a USB memory device.
Create a folder with the following name in the
uppermost directory of the USB memory device, and
copy the logo file.
Folder name: PrintLogo
To configure reader settings
If you selected [Bar Code Reader] or [Card Reader],
configure the settings for reading data. The procedure for
configuring barcode reader and card reader settings is the
same.
1
Select [Advanced] for the USB port to which the
barcode reader or card reader is connected, and press
the ENTER button.
[Advanced] appears when [Bar Code Reader] or
[Card Reader] is selected.
The [Advanced] settings screen for readers appears.
73
Advertisement
Table of Contents
