Tapping Procedures - Fisher & Paykel DCS RF24R Use And Care And Installation Manual

INSTALLATION

TAPPING PROCEDURES

LEVER TYPE KEG COUPLER
(Taps most major domestic brands)
1
. Align lug locks on tap head
with lug housing in top of
keg; insert tap head.
OPTIONAL WING TYPE KEG COUPLER
(Taps most major domestic brands)
1
. Align lug locks on tap head
with lug housing in top of
keg; insert tap head.
2
. Turn tap head handle 1/4
turn clockwise; the tap
head is now secured to
the keg.
2
. Turn tap head handle 1/4
turn clockwise; the tap
head is now secured to
the keg.
12
3
. Pull tap handle out and
push down to open beer
and CO ports in the keg.
2
The keg is now tapped.
3
. Rotate on/off valve handle
1/4 turn clockwise to open
beer and CO ports in the
2
keg. The keg is now tapped.