To Remove The Radio Port From The T-Bar - HP ProCurve Radio Port 230 Installation And Getting Started Manual

Installation Instructions
Suspended Ceiling Tile T-Bar Mount
7.
8.
9.

To Remove the Radio Port from the T-Bar:

1.
2.
3.
2-8
Ceiling View: Install into T-Bar Suspension Clip (slide the radio port into the sus-
pension clip, then rotate radio port clockwise and the T-Bar Suspension click
locks))
To install, turn radio
port counter-clockwise
T-Bar Suspension Clip
Verify the radio port has power by observing the LEDs.
Tuck the Ethernet cable into the cable recess on the underside of the radio
port.
Replace the ceiling tiles around the T-Bar to complete the installation.
Lift the ceiling tiles away from the T-Bar to which the radio port is
attached.
Using your finger, depress the T-Bar Retaining Clip that locks the radio
port to the T-Bar.
Rotate the radio port clockwise to release the T-Bar from the radio port's
T-Bar Suspension Clips.
T-Bar Suspension Clip (first secure)
T-Bar Retaining Clip