Wall Mount; Wall Mount Hardware - HP ProCurve Radio Port 230 Installation And Getting Started Manual

Wall Mount

Wall mounting consists of hanging the ProCurve Radio Port 230 or 210 along
its width or length using the pair of wide-shoulder screws provided and
mounting slots on the underside of the radio port.
The ProCurve Radio Port 230 or 210 can be mounted onto any wood, plaster,
or cement wall surface using the provided wall anchors when necessary. The
illustration shows the radio port mounted horizontally.

Wall Mount Hardware

■ Two wide-shoulder Phillips pan head self-tapping screws, or
• ANSI Standard) #6-18 X 0.875in, Type A or AB Self-Tapping Screw, or
• ANSI Standard Metric M3.5 X 0.6 X 20mm Type D Self-Tapping Screw.
■ Two wall anchors.
Safety wire-recommend between 1.0 mm (.04in.) and 1.6 mm (.06in.)and
■
security cable (optional)
Installation Instructions
Wall Mount
2-3