Changing And Saving Coffee Pour Volumes And Coffee Strength Settings - Sunbeam Cafe Barista EM8800 Instruction Booklet

Changing and saving coffee pour volumes and coffee strength settings

(continued)
Changing and saving the set relationship
between each 'coffee strength' setting and the
'length of coffee pour' volumes
You may save a different 'coffee strength'
setting for each 'length of coffee pour'
setting.
• Press the 'length of coffee pour' button
as many times as needed to reach the
required cup symbol. See figure 37.
• Then press the 'coffee strength selector'
button as many times as needed until the
indicator of the chosen coffee strength
illuminates and keep the button depressed.
See figure 38.
• After a few seconds of holding the
button depressed, all indicators are lit
permanently, except the one chosen. See
figure 39. Now let the button go.
Tip: Repeat this procedure if you want to
save the 'coffee strength' settings for the
remaining cup symbols too.
Note: The values saved remain even if the
espresso machine is switched off.
Figure 37
Figure 38
Figure 39
25