Settings For Milk-Based Coffee - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Programming continued
Programming the espresso pour volume in hot
water mode
The coffee machine is set for standard
quantities by default. You can set the cup
filling level individually for each cup size.
Select the "hot water" function by pressing
the (B) button El.
Press the (C) button repeatedly until the
required cup symbol for the desired ground
coffee quantity is displayed.
Place an appropriate cup under the coffee
delivery spout.
Then press thee button and hold it
pressed until the desired cup filling level is
reached. Button (A), (B) and (C) will flash
on rotation to indicate you are in program
mode.
Release the button. The desired cup filling
level is now stored.
Repeat the procedure if you also wish to
change the filling level for the other cup
sizes.
All values remain stored even when the
coffee machine is switched off. Should you
change your cup size, you can adapt the cup
filling level individually at any time or reset
the filling level with a "Reset". Follow the
steps described on page 28, Restoring the
factory default settings.
22
Programming settings for milk-based coffee
The standard cup filling quantity, coffee-milk
proportion and coffee froth quantity is set by
default. These settings can be individually
changed and stored for each milk-based
coffee:.
Press the Q menu button. The following
appears on the display:
I LS
4 4
4 4
411-
OK
IIP1
Press (C) button to move the selection into
the "Settings for milk-based coffee" menu.
The following appears on the display:
11111
4 4
44
4
444
411-
OK
411
Press thee button to display the
"Settings for milk-based coffee".
The following appears on the display:
411-
OK
-10
Press the (C) button until the desired
milk-based coffee settings to be changed
appears in the selection menu and then
confirm selection by pressing thee
button.
The same setting options are available for all
milk-based coffees. The following illustrates
the possibilities using a cappuccino as an
example.