Table of Contents
Advertisement
Hardware Installation
1.
Connect an HDMI source (such as a Blu-Ray, gaming console, media
server etc.) to Transmitter using high-quality HDMI cables.
2.
Connect a high-quality, well terminated Cat5e/6 cable between the HDBT
output of the Transmitter and HDBT input of the Receiver.
3.
Connect the HDMI display (LED/LCD display or projector) to the HDMI
output of the Receiver
4.
Connect IR emitters from the IR OUT ports of the Transmitter and
Receiver and firmly attach the IR emitter eye directly over the infrared
receiving sensors of the source and display device to be controlled.
Location of the emitter eye on each device may need to be adjusted later
to achieve best IR performance.
5.
Insert IR receivers into IR IN ports of the Transmitter and Receiver.
Position the IR receiver eye on or near the display or source device,
ensuring a clear line of sight to the remote handset used to control it.
6.
Connect the power supply to the Transmitter or Receiver and power on
all devices.
Advertisement
Table of Contents
