Table of Contents
Advertisement
Hardware Installation
1.
Connect an HDMI source (such as a Blu-Ray, gaming console, media
server etc.) to the Transmitter using high-quality HDMI cables.
2.
Connect a high- quality, well terminated Cat5e/6 cable of no more than
70m/230ft in length between the HDBT output of the Transmitter and the
HDBT input of the Receiver.
Note: 70m/230ft is the maximum recommended transmission distance for this
model and denotes perfect transmission conditions – including straight cable
runs with no electrical interference. Transmission range may be affected if this
distance is exceeded during installation.
3.
Connect the HDMI display (LED/LCD display or projector) to the HDMI
output of the Receiver
4.
Connect IR emitters from the TX ports of the Transmitter and Receiver
and firmly attach the IR emitter eye directly over the infrared receiving
sensors of the source and display device to be controlled. Location of the
emitter eye on each device may need to be adjusted later to achieve best
IR performance.
5.
Insert IR receivers into IR RX ports of Transmitter and Receiver. Position
the IR receiver eye on or near the display or source device, ensuring a
clear line of sight to the remote handset used to control it.
6.
Connect the power supply to the Transmitter or Receiver and power on
all devices.
www.nacebrands.com
14
www.cabletronix.com
Advertisement
Table of Contents
