Related Manuals for CableTronix CT-HDVD-EXT-IR230
Summary of Contents for CableTronix CT-HDVD-EXT-IR230
-
Page 1: User Manual
User Manual CT-HDVD-EXT-IR230 230 Feet HDBaseT Extender with Bi-directional PoE Version: V1.0.0 www.nacebrands.com www.cabletronix.com... -
Page 2: Important Safety Instructions
(including amplifiers) manufacturer. that produce heat. 10. Refer all servicing to 5. Do not place sources of open qualified service flames, such as lighted candles, personnel. on the unit. www.nacebrands.com www.cabletronix.com... - Page 3 Ethernet technology CT-HDVD-EXT-IR230 ensures only one power adapter is needed at either TX (transmitter) or RX (receiver) side to power both units. LEDs indicate power is being supplied to the units, and indicates an established connection between connected devices.
-
Page 4: Package Contents
Actual signal transmission distance can vary depending on signal resolution, cable quality, graphics card, and/or display used in the system. Package Contents 1 x Transmitter CT-HDVD-EXT-IR230 1 x Receiver CT-HDVD-EXT-IR230 1 x 18V 1A DC Power Supply ... -
Page 5: Specifications
3840x2160@24/25/30/50/60Hz, 1080p, 1080i, 720P, 576p, 576i, 480p, 480i; Input Video Level 0.5~1.0 Vp-p Maximum Pixel Clock 297MHz Output 1 x HDBT Output Signal Type HDBaseT (HDBT) 4096x2160@24/25/30/50/60Hz, Output Resolution Support 3840x2160@24/25/30/50/60Hz, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i; www.nacebrands.com www.cabletronix.com... - Page 6 HD, DTS-HD Master Audio Control 1x IR TX, Control Method 1x IR RX General 0°C ~ 45°C (32°F ~ 113 °F), Operating Temperature 10% to 90%, non-condensing -20°C ~70°C (-4°F to ~ 158 °F), Storage Temperature 10% to 90%, non-condensing www.nacebrands.com www.cabletronix.com...
- Page 7 11W Max (Pair) 175mm x135mm x 90mm (Pair) Case Dimension 7in x 5.5in x 3.5in Product Dimension 162mm × 74MM × 25mm (L x W x H) 6in x 3in x 1in ±8kV(Air-gap discharge)/ ESD Protection ±4kV(Contact discharge) www.nacebrands.com www.cabletronix.com...
- Page 8 0.5~1.0 Vp-p Maximum Pixel Clock 297MHz Output 1 x HDMI Output Signal Type HDMI: HDMI1.4 w/ HDCP 2.2 pass through 4096x2160@24/25/30/50/60Hz, Output Resolution Support 3840x2160@24/25/30/50/60Hz, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i; Video Impedance 100ohms Transmission Distance Cat 5e/6: www.nacebrands.com www.cabletronix.com...
- Page 9 0°C ~ 45°C (32 ~ 113 °F), Operating Temperature 10% to 90%, non-condensing -20°C ~ 70°C (-4 ~ 158 °F), Storage Temperature 10% to 90%, non-condensing Product Weight 200g Power Supply DC 18V 1A Power Consumption 11W Max (Pair) www.nacebrands.com www.cabletronix.com...
- Page 10 175mm x135mm x 90mm (Pair) Case Dimension 7in x 5.5in x 3.5in Product Dimension 162mm × 74mm × 25mm (L x W x H) 6in x 3in x 1in ±8kV(Air-gap discharge)/ ESD Protection ±4kV(Contact discharge) www.nacebrands.com www.cabletronix.com...
- Page 11 Panel Transmitter Front Panel Name Description On: Transmitter is powered on. Power LED Off: Transmitter is powered off. On: Transmitter and Receiver are linked. Blinking: Poor Connection Link LED Off: No link. www.nacebrands.com www.cabletronix.com...
- Page 12 If Transmitter is connected to a power supply, Receiver Power will power over PoE. HDBT OUT Connects to the Receiver via a CAT5E/6 cable. IR RX Connects to the supplied IR receiver (30KHz-50KHz). IR TX Connects to the supplied IR emitter. www.nacebrands.com www.cabletronix.com...
- Page 13 HDMI IN Connects to HDMI source devices. Receiver Front Panel Name Description On: Receiver is powered on. Power LED Off: Receiver is powered off. On: Transmitter and Receiver are linked. Blinking: Poor Connection. Link LED Off: No link. www.nacebrands.com www.cabletronix.com...
- Page 14 Connects to a power supply. If Receiver is connected to a power supply, Transmitter Power will power over PoE. HDBT IN Connects to the Transmitter via a CAT5E/6 cable. Connects to the supplied IR receiver (30KHz-50KHz). IR RX www.nacebrands.com www.cabletronix.com...
- Page 15 Name Description Connects to the supplied IR emitter. IR TX HDMI OUT Connects to HDMI display device. www.nacebrands.com www.cabletronix.com...
-
Page 16: Hardware Installation
IR receiver eye on or near the display or source device, ensuring a clear line of sight to the remote handset used to control it. Connect the power supply to the Transmitter or Receiver and power on all devices. www.nacebrands.com www.cabletronix.com... - Page 17 www.cabletronix.com...
- Page 18 The IR pass-through function allows you to control the source from the display's location or control the display from source's location. Scenario 1 In this case, you can control the TV on Transmitter side. HDMI IR TX Transmitter Cat X Cable Receiver IR RX HDMI DVD remote www.nacebrands.com www.cabletronix.com...
- Page 19 Scenario 2 In this case, you can control the Blu-Ray on Receiver side. TV remote HDMI IR RX Transmitter Cat X Cable Receiver IR TX HDMI www.nacebrands.com www.cabletronix.com...
-
Page 20: Troubleshooting
Check that all the cables are qualified and connected properly. Check that the display works properly, and that source devices have normal signals outputs. Check that no compatibility issues exist between the Receiver and display. If so, attempt testing with a different model of display. www.nacebrands.com www.cabletronix.com... -
Page 21: Product Service
GLOSSARY Acronym Complete Term Direct Current Digital Video Disc Electro-static Discharge High Definition HDBT HDBaseT HDCP High-bandwidth Digital Content Protection HDMI High Definition Multimedia Interface Infra-red Liquid Crystal Display Light Emitting Diode Power over Ethernet www.nacebrands.com www.cabletronix.com... - Page 22 CABLETRONIX 1-Year Limited Warranty CABLETRONIX. (the "Company") warrants to the Original Purchaser that the item purchased is free from defects in workmanship or material under normal use. This warranty starts on the date of shipment of the hardware to the Original Purchaser.
- Page 23 employees, distributors, and dealers of the Company are not authorized to make modification to this warranty, or additional warranties binding on the Company. Accordingly, additional statements such as dealer advertising or presentations, whether oral or written, do not constitute warranties by the Company and should not be relied upon. This warranty gives you specific legal rights.