Troubleshooting - CableTronix CT-HDBASET-330 User Manual

Troubleshooting

1. Why is the power LED off?

Check that all the devices are powered on.

Check that all the cables are qualified and connected properly.
2. Why is the Link LED off or blinking?

Check that all the devices are powered on.

Check that all the cables are qualified and connected properly.

Check that the length of Cat5e/Cat6 is appropriate. For more
information, see cable requirements under specification charts.

Check that Transmitter and Receiver work properly.
3. Why does the display connected to the Receiver show no picture?

Check that all the devices are powered on.

Check that all the cables are qualified and connected properly.

Check that the display works properly, and that source devices have
normal signal output.

Check that your display is switched to the correct source input mode,
such as switching to HDMI-1 if HDMI-1 interface is connected to the
Receiver via HDMI cable.

Check that no compatibility issues exist between Receiver and display.