Introduction; About This User Guide; About Your Product; Unpacking And Setup Instructions - Rimage AutoEverest AutoPrinter User Manual

Introduction

This manual provides the information needed to operate and identify the
parts of the AutoEverest and AutoPrism III AutoPrinter. To set up your
AutoPrinter and install the CD Designer™ Software Suite, refer to the set up
and installation guide included with your product.
For technical information, visit www.rimage.com/support.
Important! Your Rimage AutoPrinter™ system may not look exactly like the
model featured in this user guide.

About this User Guide

• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our web
site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 10 paths. Other Windows operating system navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Tip: A Tip suggests alternative methods that may not be obvious and helps
you understand the benefits and capabilities of the product.
Important!
An Important note provides information essential to the completion of a
•
task.
Important supplemental information.
•
You can disregard information in a Tip and still complete a task, but do
•
not disregard an Important note.
'
Caution: A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
'
Warning! A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining the
equipment.
110656-000-O
For more information visit www.rimage.com/support

About your Product

The Rimage AutoPrinter is available with either the Everest printer or the
Prism III printer. For specific information about your printer, refer to the
Everest or Prism printer user guide that shipped with your product.
Tip: The term 'AutoPrinter' is used throughout this user guide to refer to
both the AutoEverest and the AutoPrism. The terms 'AutoEverest' and
'AutoPrism' are used only to refer to either product specifically.

Unpacking and Setup Instructions

Unpacking and installation instructions are included with the Rimage
AutoPrinter. Refer to the setup and installation guide included with your
Rimage AutoPrinter.
1