Klarstein 10032463 Manual page 38

EN
38
Set up Permanent Drainage
Should you prefer to use the appliance without having to empty the tank every so often,
proceed as follows:
Remove the drain knob and
rubber plug and retain for future
use.
Connect the drain tube supplied
to the water outlet as shown and
locate the other end into a drain.
The drain tube may be extended
by adding an extension tube and
using a suitable connector.
Important Notes on Permanent Drainage:
1. The drain must be at a lower level than the drain hole on the unit.
2. Flashing 'Water Full' indicator will not function in this mode of drainage.
3. If you want to extend the water tube, you can connect it with another tube (OD:
18mm).
Note: The extended tube is NOT supplied along with the unit.
Originally supplied
drain tube
Originally
supplied
drain tube
Extended drain tube
(outer diameter
18mm)