Klarstein 10032463 Manual page 35

Efficiency boosting
This unit is equipped with "energy efficiency boosting" function, by adding water (3L
max.) to the water gate at the side of the unit, the energy efficiency can be elevated.
The principle is: while the machine is working, the condenser will be getting hot, if you
add the water into the unit after the unit has been worked for more than one hour, the
water will cool down the condenser, thus it consumes less power, i.e. saving energy.
1
Take out the water bottle
from the side of the unit.
• This efficiency feature by adding water is proposed to do after one hour operation
and the water should NOT be over 3L, otherwise, the "water full" indicator will light
in red and the unit will stop working.
• In case the "water full" indicator is in red, please drain the water from the drain
point at the back side of the unit until the red light goes out. The unit should work
again now.
2
Fill the water (max. 3L).
3
Place the water gate into
space.
EN
35