Quick Start - Samson AirLine Micro Earset Owner's Manual

Quick Start

Please follow these basic procedures for setting up and using your AirLine Micro:
1. For your AirLine Micro system to work correctly, both the receiver and transmitter must be set to the same channel.
Remove all packing materials (save them in case your unit needs service in the future) and check to make sure that the
supplied receiver and transmitter are set to the same channel.
Note: The channel number is laser-engraved on the back of the AR2 and AH2 chassis. If these channels do not match,
please contact Samson Technical Support at 1-800-372-6766. If your unit was purchased outside of the United States,
please contact your local distributor.
2. Before using your AirLine Micro system you should fully recharge the transmitter and receiver batteries. Plug the AC
adaptor into a power socket. Connect the USB Y-Cable into the USB socket on the AC adaptor. Plug the two mini-USB
connectors into the USB ports on the AH2 transmitter and AR2 receiver. When the transmitter and receiver are completely
charged, the BLUE LED indicator will turn off.
Getting the most out of the rechargeable battery:
• Completely charge the batteries before first use
• Fully charge the battery before it will be used.
• After the battery is charged, unplug the charger from the outlet.
• The optimal temperature range for using and storing the battery is 50°F - 86°F (30°C - 50°C).
The battery performance and operation may decrease in temperatures below 50°F (30°C).
AirLine Micro Earset 9