Assembling The Vacuum Cleaner - Windsor Versamatic Plus VSP 18 Manual

1 Handle grip
2 Handle assembly
Bag full indicator
3
4 On / Off switch
Cover release latch
5
Exhaust filter cover
6
7 Front cover
Motor cover
8
9 Power head
Locking catch
10
11 Foot pedal
12 Hose
Retaining ring
13
14 Cable
15 Attachment tube handle
16 Handle catch
17 Carrying handle
18 Cable hook
19 Attachment tube
20 Dust bag housing
21 Crevice nozzle
Upholstery nozzle
22
23 Pile adjustment knob

Assembling the vacuum cleaner

Put the power head (9) on the floor with swivel
neck (26) and support lever (27) upright. Turn
the locking catch (10) on the filter bag housing
(20) to the left and place it carefully on the
swivel neck and the support lever. Then turn
the locking catch back.
To lock the handle turn the handle catch (16)
at the handle joint of the filter bag housing
(20) forward, then slide the handle assembly
(2) in as far as possible and lock it with the
handle catch.
Insert the attachment tube (19) into its storage
position on the side of the machine. The
attachment tube handle (15) must be placed
on the projection (24). Slide the proper end of
the hose into the tube (19).
To connect the hose with the filter bag housing
insert the black hose end into the connecting
tube (25) and slide it in completely. To unlock
the hose press the retaining ring (13) at the
projecting sections.