Disabling Flat Point - Fujitsu LifeBook E-6666 Manual

Disabling Flat Point

When you connect a USB mouse to this PC, both of the flat point and the USB mouse are
enabled. If you want to disable the flat point when you connect a USB mouse, make the following
settings:
1 Set "Internal pointing device" item in BIOS setup to "Manual"
2 When system starts up, push down the [F4] key while pressing down the [Fn] key.
The flat point is enabled or disabled every time when you push down the key.
IMPORTANT
Make sure to connect a mouse when you disable the flat point.
Critical Point
Even though you disabled the flat point by pushing down the F4 key with pressing down the
Fn key, the flat point is enabled after restart or resume operation of the PC.
If you set "Internal pointing device" item in BIOS set up to "Always disabled", the flat point is
always disabled.
If you set "Internal pointing device" item in BIOS set up to "Always disabled", the flat point is
always disabled.
71