Table of Contents
Advertisement
Preparation and Preliminary knowledge
Loading of batteries
Load the wireless mouse with two AAA-size alkaline batteries referring to the article "Replacing
batteries" of this manual.
H-L-OFF switch
Infrared transmission power of this wireless
mouse can be switched between low and high
with the H-L-OFF switch. Set this switch to the
H (High power mode) or L (Low power mode)
position taking the operating environment and
conditions into consideration. When this mouse
is out of use, set this switch to the OFF position
for saving battery power.
Operating method
This wireless mouse transmits data on mouse operation to the personal computer on infrared
rays. When operating the wireless mouse, point its transmitter part at the photosensor of the
personal computer. The operating method of this wireless mouse is the same as the general PS/
2 mouse.
It is recommended to use this wireless mouse within a distance of 1.5 m (High power mode) or
0.5 m (Low power mode) from the personal computer.
Critical Points
The one-touch operation buttons cannot be
used in the following cases.
The illustration of a personal computer
appearing on this page is just a reference.
The outward appearance slightly differs with
the model. Before using this wireless mouse,
check the personal computer for the location
of the photosensor for the wireless mouse.
76
OFF
L
H
Wireless mouse
Photosensor
for wireless
mouse
Advertisement
Table of Contents
