Table of Contents
Advertisement
Critical Point
If you operate SUS/RES switch while the hard disk access indicator or the floppy disk access
indicator appears, the data on the hard disk, floppy disk or super disk may be corrupted.
Some operating system calls Slot 1 as "Slot 0" and Slot 2 as "Slot 1" in the PC card access
indicator.
Windows 98 / Windows Me tries to detect the existence of a CD periodically if CD auto insert
function is on. This causes periodical indication of the CD access indicator in the status indi-
cator LCD. You can set up as followings to disable this auto insert function (This setting only
applicable on Windows 98 and Windows Me):
1
Click on the Start ->Settings -> Control Panel.
2
Click on the System icon
3
Click on the Device Manager tab.
4
Double-click on the "CD-ROM".
CD-ROM device is indicated.
5
Click on the CD-ROM device and then click on the Properties.
The Properties of CD-ROM Device dialog box appears.
6
Click on the Setting tab.
7
Click on the "Auto notification of insertion" in Option to set it disabled.
8
Click on OK.
9
Click on OK or Close in the System Property dialog box to go back to the Control
Panel window.
10 Restart the PC unit.
To enable auto notification, click on "Auto notification of insertion" in step 7 to put
check mark on it.
12
Advertisement
Table of Contents
