Ericsson R320s Working Instruction page 91

4. SYSTEM CONNECTOR TEST
A vehicle handsfree set is used in this test to verify the system connector.
Connect a vehicle handsfree kit.
Attach the phone in the holder. The display should now indicate charging.
Turn on the phone by pressing the NO key. The battery indicator indicates charging while
the name of the operator for the SIM card is shown.
Set up a call by dialling the number and press YES key. Check if the microphone and
earphone are OK. Press NO key to hang up.
5. VIBRATOR TEST
Verify that the vibrator is OK by activating the vibrator in the menu of the mobile phone.
When activated the vibrator vibrates 3 times.
6. IR TEST
To verify that the IR communication is OK between the mobile phone and the computer by
using a "Jet Eye".
Click on the IR test icon on the screen. A window is shown with the text "No availible
infrared devices are in range". Take a phone, insert the SIM card, connect battery and press
NO button to start the unit. Press the right arrow key five times, then down key two times.
Now the display should say " Infrared Port ". Press YES. Choose "On". Place the phone
with the IR window next to the Jet Eye and wait about 2 seconds. On the computerscreen
you should be able to read "One availible infrared device in range". If so, the
communication is OK!
If the mobile phone is passing these steps of testing without any malfunctions it is OK to return
it to the customer.
If there are any failures the phone must be repaired at the service or swapped/sent to higher level
of service.
4 Revision History
Rev.
C
2/00021-1/FEA 209 544/21 C
Date Changes / Comments
1999-11-16 Convert from FrameMaker to Word
Added R320sc.
Corrected manual Ir test instruction.
Mechanical Test Description
3(3)