2.2
Instruction
•
Dismount the phone as described in Mechanical Instructions 3/00021-1/FEA 209
544/21 (Disassembly).
#
1
2
3
4
5
•
Mount the phone as described in Mechanical Instructions 3/00021-1/FEA 209 544/21
(Reassembly).
3 Revision History
Rev.
B
3/000 21-2/FEA 209 544/21 B
Figure
fig2.1
fig2.1
Date
Changes / Comments
2000-03-10
Chapter 2 added
Instruction
Remove the vibrator assembly
from the old frame. (fig 2.1).
Take a new frame assembly.
Mount the old vibrator
assembly the RF-gasket in the
frame.
Mount marking labels on the
three µBGA components
(fig2.2).
Apply three glue spheres on
the paper labels with a
diameter about 3-5mm.
Working Instruction, Standard
Note
Don't cover the grounding
surface on the board with
the labels.
Exchange the elastomeric
connector etc. before you
start working with the glue.
3(3)