1 General
The mechanical service package consists of a computer and interface cables. A hardlock is
required for security reasons.
2 Hardware
All test hardware must be approved by Ericsson and is documented in the Equipment List.
2.1
Computer
IBM compatible computer with Windows 95, Windows 98 or Windows NT and with two
free RS232 serialports.
2.2
Hardlock
Hardlock with article number KRY 105 165 is required. The hardlock should be connected to
the parallel port.
2.3
Service cable
Connect service cable to one of the serial ports on the PC and to the system connector.
2.4
IR test eye
Install according to the manual supplied with the IR test eye.
1/00021-1/FEA 209 544/21 B
Mechanical Test Installation Instructions
2(3)