FP401011 MUK REV 1.qxp_Layout 1 10/08/2016 11:40 Page 6
Blade Cleaning
•
Occasionally you may wish to clean the blade.
•
Firstly, turn the Blending Jug
(see image) and unscrew the Blade Base (18).
Turn anti-clockwise until loose then remove.
•
Clean the Blade with the aid of a small brush,
in warm, soapy water and dry.
WARNING: Sharp Blades
•
To reassemble, follow the instruction above in
reverse order. Ensuring the Seal Ring
correctly fitted on the Blade Base (18).
Tighten the Blade Base
6
(17)
upside down
1
(19)
is
(18)
until secure.