Sfp Interfaces (Fo1 - Fo2); Dsl Interfaces (X3 - X4) - ABB EDS500 Series Manual

Device description
8
4.7.2

SFP Interfaces (Fo1 - Fo2)

All SFP interfaces are designed according to Small Form-Factor Pluggable (INF-8074i).
SFP interface (Fo1 - Fo2)
Electrical specification
Protocol
Data rate
Duplex
Plug type
Optical SFPs
Cable
Plug type
Details on available SFPs can be found in Chapter 4.10.1, "Optical SFP Modules"
Only transceivers up to laser class 1 according to EN 60825-1 are allowed to be used for the
SFP interfaces.
Any warranty claims can only extend to SFPs delivered by ABB.
4.7.3

DSL interfaces (X3 - X4)

The data transmission method SHDSL "Single-pair High-speed Digital Subscriber Line" has
been specified by the International Telecommunications Union (ITU recommendation G.991.2)
and represents a modern, high performance, comfortable and secure communication
method. SHDSL works with data rates from 192 kbps up to 5.696 Mbps on a copper pair in full
1KGT150966 V000 1
Pin allocation Ethernet interface (RJ-45)
Pin assigned as data transmission
device (MDI)
1 Tx+
2 Tx-
3 Rx+
4 n.c.
5 n.c.
1
6 Rx-
7 n.c.
8 n.c.
assigned as network termina-
tion device (MDI-X)
Rx+
Rx-
Tx+
n.c.
n.c.
Tx-
n.c.
n.c.
IEEE 802.3
Fast Ethernet
100 Mbps
Full duplex or half duplex (manual)
SFP (INF-8074i)
2 km (62.5/125 and 50/125 μm multi mode)
15 km (9/125 μm single mode)
40 km (9/125 μm single mode)
80 km (9/125 μm single mode)
Further types on request
Duplex LC (IEC 61754-20, TIA604-10-A)
W A R N I N G
A D V I C E
Connections
31