ABB EDS500 Series Manual page 10

Warnings and cautions
No plug shall be freely accessible in normal operation due to safety reasons.
Connect the device only if you can make sure that the specifications are kept.
Only transceivers up to laser class 1 according to EN 60825-1 are allowed to be used for the
SFP interfaces.
EDS500 devices are industrial products (EN 55032 class A). In a domestic environment
this product may cause radio interference in which case the user may be required to take
adequate measures.
Electronic components are sensitive for electrostatic discharge.
To prevent damages to your devices deviate possibly occurring static charges before
touching the module or components. We recommend to wear a conductive grounded wrist
tape.
10
W A R N I N G
W A R N I N G
W A R N I N G
A D V I C E
A D V I C E
Safety Instructions
1KGT150966 V000 1