Cruise Control; To Set Cruise Control - Subaru 2001 Outback Owner's Manual

7-38
Starting and operating

Cruise control

Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more.
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
. When towing a trailer
NOTE
. If you press the "CRUISE" main
switch button while turning the ignition
switch "ON", the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
"Acc" or "LOCK" position, and then
turn it again to the "ON" position.
. Make sure the "CRUISE" main
switch is turned off when the cruise
control is not in use to avoid uninten-
tionally setting of the cruise control.
& To set cruise control
1. Press the "CRUISE" main switch
button.
The cruise control indicator light on the
combination meter will illuminate.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the "RES/SET" switch to the
"SET" side and release it. Then release