Subaru 2001 Outback Owner's Manual page 187

! Seek tuning (SEEK)
If you press the " " or " " side of the
"SEEK" button briefly, the radio will auto-
matically search for a receivable station
and stop at the first one it finds. This
function may not be available, however,
when radio signals are weak. In such a
situation, perform manual tuning to select
the desired station.
! Scan tuning (SCAN)
If you press the "SCAN" button, the radio
will switch to the scan mode. In this mode,
the radio scans through the radio band
until a station is found. The radio will stop
at the station for 5 seconds while display-
ing the frequency, after which scanning
will continue until the entire band has been
scanned.
Press the "SCAN" button again to cancel
the SCAN mode. If you press the "SCAN"
button while the radio is stopped at a
station, the radio stays stopped at that
station. If you press the button while the
radio is scanning, the radio stops at the
next receivable station.
Automatic tuning may not function prop-
erly if the station reception is weakened by
distance from the station or proximity to
Audio
tall buildings and hills.
! PTY (Program type) group tuning
(only FM reception)
Press the "PTY/CAT" button to change to
the PTY selection mode. At this time, the
PTY group that you are currently listening
to will be displayed for 10 seconds. In PTY
selection mode, "PTY SEL" is displayed
on the screen.
– CONTINUED –
5-11