Leviton RENOIR II Series Installation

WARNINGS AND CAUTIONS:

TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH ELECTRICAL CODES AND REGULATIONS.
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT AN ELECTRICIAN.
DO NOT GANG VERTICALLY.
ONLY INSTALL FOR THE ALLOWED LOAD TYPES. INSTALLATION FOR ANY OTHER LOAD TYPE WILL VOID WARRANTY AND POSSIBLY CAUSE DAMAGE TO
THIS DEVICE AND/OR CONNECTED EQUIPMENT.
USE THIS DEVICE WITH COPPER OR COPPER CLAD WIRE ONLY.
INSTALL THIS DEVICE IN A METAL OUTLET BOX ONLY.
INPUT - 120 - 277
VAC 60 HZ

Features and Operation:

Installation Requirements:

Installation Instructions:

TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT
WARNING:
1.
CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE
WIRING!
2.
3.
4.
5.
6.
7.
FAN SPEED CONTROLS
Cat. Nos. AWRMG-QXX, AWSMG-QXX & AWSMT-QXX
Figure 1.
not
Multi-Gang Installations
(See Figure 2).
(see Figure 3).
Installation is complete.

LIMITED 5 YEAR WARRANTY AND EXCLUSIONS

RENOIR II
INSTALLATION
Load
Disconnected
Hot (Black)
Black
Yellow
White
Neutral (White)
Black
Hot (Black)
Yellow
White
Neutral (White)
Fan Speed Control
Hot (Black)
White
Line
120-277VAC
60 Hz
Neutral (White)
Load
Load
Connected
Disconnected
Service Switch
Blue
Green
Ground
– Run a separate neutral wire
for each control circuit
Blue
Green
Ground
– Run a separate neutral wire
for each control circuit
Center tab in opening
Align flats when
installing knob
Wiring Diagram
Blue
Yellow
For u e in multi-way
control (remote)
application .
Cap wire if not u ed.
Ground (Green)
Load
Connected
Service Switch
Load
White
Load
White
Black
Fan
White