Base Assembly - Russell Hobbs RHOFR5001 (B) Manual

1. Attach the castors to the base plate and secure using
the 4 x nuts supplied.
2. Then turn the heater upside down and position
between the end fins.
3. Attach the base plates by hooking the 2 x U-bolts
through the fins and securing with the 4 x wing nuts.
4. Once secure, turn the radiator round so that it is
sitting on the wheels.
Castor
Nut
U bolt
Rear of the
appliance

BASE ASSEMBLY

Wing nut
For Customer Services & Spare Parts please call 0345 209 7461
Or visit us at https://mda.russellhobbs.com
U shaped
base plate
Flat base plate
Page 8
Front of the
appliance