Pcs 7 Sfc Topology Control - Siemens SIMATIC PCS 7 Programming And Operating Manual

6.16

PCS 7 SFC Topology Control

PCS 7 SFC Topology Control
You have the following operating options in SFC Topology Control.
Buttons and check boxes
● "Synchronize" check box
If this check box is selected, the overview is synchronized to the detail view.
● "Sequencer Properties" button
Use this button to open the dialog box with the object properties of the current sequencer.
For further information, refer to the section: "Properties" Dialog Box for the Sequencer
(Page 70)
● "Start Condition" button
Use this button to open the dialog box for the start conditions of the current sequencer.
For further information, refer to the section: "Properties" Dialog Box for the Start Condition
(Page 71)
● Button to open a resizable window
Click this button to open the detail view in a resizable window.
Operating options in the detail window
When you click on a step or a transition, the "Properties" dialog for the step or transition opens.
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA
Operating and monitoring SFCs
6.16 PCS 7 SFC Topology Control
57