Sfc Instance" Faceplate, "Block Contacts" View - Siemens SIMATIC PCS 7 Programming And Operating Manual

6.6

"SFC Instance" faceplate, "Block contacts" view

"Block contacts" view
The upper part of the view is identical to the following view: "SFC Instance" faceplate, "Actual
Values" view (Page 37).
The following are also displayed:
A line containing the name, block type, status, and a button for opening the corresponding
faceplate for each block contact.
"Block contacts" view of an SFC instance
SFC Visualization (V9.0)
Programming and Operating Manual, 05/2017, A5E41356392-AA
Operating and monitoring SFCs
6.6 "SFC Instance" faceplate, "Block contacts" view
41