Table of Contents
Advertisement
T A C 7
A p p e a r a n c e
Taking a Measurement
Do not measure any liquid, paste, powder, flammable, or combustible substances.
Do not exceed part size and weight recommendations when measuring.
A sample measurement can take anywhere from 20 to 60 minutes to be completed. The
measurement time largely depends on the measurement setup in the application.
Follow these steps to ensure an accurate measurement.
1. Prepare the sample for measurement. See Sample Specification section earlier for additional
information.
2. Start the PANTORA application, select the TAC7 tab, enter a name for the sample and any
additional information as required.
3. Open the sample drawer and carefully remove the cassette from the drawer.
4. Place the cassette on a solid surface. If required open the clamps on the cassette and lower
the sample plate.
Open Clamp
Sample plate
10
C a p t u r e
S y s t e m
Cassette
Sample drawer
Open clamp
Advertisement
Table of Contents
