Page 1
TAC7 Appearance Capture System User Guide...
Page 3
Industry Canada Compliance Statement CAN ICES-3 (A) / NMB-3 (A) Equipment Information Use of this equipment in a manner other than that specified by X-Rite, Incorporated may compromise design integrity and become unsafe. WARNING: This instrument is not for use in explosive environments.
Page 5
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION, AND NON-INFRINGEMENT. NO EMPLOYEE OR AGENT OF X-RITE, OTHER THAN AN OFFICER OF X- RITE, IS AUTHORIZED TO MAKE ANY WARRANTY IN ADDITION TO THE FOREGOING.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Table of Contents Overview and Installation Packaging Information Instrument Installation Guidelines System Requirements Software Installation Starting PANTORA Operation...
S y s t e m OVERVIEW AND INSTALLATION The TAC7 device is a completely new instrument based on X-Rite’s Total Appearance Capture technology. The TAC7 instrument uses 30 light sources and 4 cameras for sampling the material. Thanks to X-Rite’s highly efficient material description algorithms and high resolution cameras, it delivers precise material descriptions for many material types (e.g., leather, plastic, textiles,...
C a p t u r e S y s t e m Instrument Installation Guidelines X-Rite TAC7 is designed for precision sample measurements. It is important that certain precautions be taken to ensure the best environment for its use. •...
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m OPERATION Refer to the documentation or online help for the software application that you are using with your instrument.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Sample cassette indicator White: sample cassette is in place. Red: system error occurs. Drawer locked indicator White: sample drawer is properly locked.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Size • Recommended: A single sample should be between Sample size: 150 x 150 mm and 200 x 200 mm. 297 mm x 210 mm Sample thickness 30 mm •...
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Taking a Measurement Do not measure any liquid, paste, powder, flammable, or combustible substances. Do not exceed part size and weight recommendations when measuring.
Page 13
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m 5. Place the sample on the sample plate in the cassette, and align the desired measurement area below the measurement spot.
Page 14
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m 8. Push in sample drawer until it stops. 9. Push in drawer handle to engage cassette to the proper measurement location. Push in handle Handle closed position 10.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m CALIBRATION The software application prompts for an instrument calibration when required. Refer below for procedure.
Page 16
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m 3. Push in sample drawer until it stops. 4. Push in drawer handle to engage cassette to the proper measurement location. Handle in closed Push in handle position...
Page 17
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Color calibration card in measurement position 10. Push in sample drawer until it stops. 11.
X-Rite also offers on-site system support. Please contact your X-Rite representative for additional information. X-Rite, Incorporated has offices around the world. You can contact us using one of the following methods: • To identify the X-Rite service center nearest you, please visit our web site at: www.xrite.com and click the Contact Us link.
Calibration procedure Calibration tile is dirty or damaged. fails. Clean the white tile per procedure in Appendix, or replace if damaged. If damaged, arrange for replacement by contacting X-Rite Support. Instrument and Interface cable not connected. software not Connect the interface cable between the computer and the instrument.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Cleaning the Instrument In order to maintain accuracy the TAC7 should be operated in an environment free of dust and other sources of contamination.
T A C 7 A p p e a r a n c e C a p t u r e S y s t e m Technical Specifications Dimensions: Approx. 74 cm x 74 cm x 172 cm Weight: 139 kg (306 lbs) Sample Size &...
Page 24
Switzerland Phone (+41) 44 842 24 00 Fax (+41) 44 842 22 22 Asia Pacific Headquarters X-Rite Asia Pacific Limited Suite 2801, 28th Floor, AXA Tower Landmark East, 100 How Ming Street Kwun Tong, Kowloon, Hong Kong Phone (852) 2568 6283 Fax (852) 2885 8610 Please visit www.xrite.com for a local office near you.