Page 1
Pioneering for You Wilo-MVIE 5,5 -> 7,5 kW de Einbau- und Betriebsanleitung Inbouw- en bedieningsvoorschriften en Installation and operating instructions ru Инструкция по монтажу и эксплуатации Notice de montage et de mise en service 4 122 430-Ed.05 / 2015-03-Wilo...
1. General 1.1 About this document 2.4 Safety instructions for the operator 2. Safety 2.5 Safety instructions for inspection and installa- tion work 2.6 Unauthorised modification and manufacture of 2.1 Indication of instructions in the operating spare parts instructions Symbols 2.7 Inadequate use Signals: DANGER! Actuely dangerous situation.
CAUTION! Danger of damage due to incorrect 4. Application packaging! If the pump is transported again later on, it must be well packed to avoid any damage during transport. • Use the original packaging for this, or select a sim- ilar packaging.
The motor and its converter 6.2 Function 5.3 Accessories 7. Installation and electrical connection CAUTION! 7.1 Preparation 6. Description and function 6.1 Description of the product The pump...
Page 14
7.2 Description (Fig. 1, 2, 5, 6, 7, 8) CAUTION! CAUTION! 7.3 Installation CAUTION! Tempe- Loss of head rature Altitude Loss of head...
Page 15
Principal dimensions and connections (Fig. 3) Pump type 6” 1600/6 8” 2200 7000 10” 9500 7.4 Electrical connections (Pos. b) The sensor, external setpoint and [aux.]/[ext.off] input cable must be necessarily DANGER! Danger of death! screened and must be inserted into the gland M12 Inadequate installation and electrical connections or M16.
Page 20
Control laws IN1 : Input signal in « Constant pressure » and « P.I.D. control » mode Sensor signal 4-20mA Sensor signal 0-10V 100% 100% Sensor signal 0-20mA Sensor signal 2-10V 100% 100% IN2 : Input of the external set value control in « Constant pressure » and « P.I.D. control » mode Set value 4-20mA Set value 0-10V 100%...
8. Operation 8.3 Description of standard symbols 8.1 Control elements Symbol Description The encoder Setting with encoder Switches 8.4 Display 8.4.1 Display status page 8.2 Display structure Pos. Description 8.4.2 Navigation element...
Page 22
Symbol Description Position Switch 1 Description Position Switch 1 Description 8.5 Menu description 8.5.1 List (Fig. 12) Position Switch 1 Description Position Switch 1 Description CAUTION! Position Switch 1 Description Position Switch 1 Description Position Switch 1 Description...
Page 23
Fig. 12 Navigation of basic menus in normal operation (Switch1 = OFF in «OPERATION » position)
Page 24
Fig. 13 Navigation of menu <4.0.0.0> « Informations »...
Page 25
8.5.2 Parametrization of <2.0.0.0> and <5.0.0.0> menu Easy Mode Expert Mode Fig. 14 EASY Mode EXPERT Mode...
10. Maintenance CAUTION! DANGER! WARNING! Replacement frequencies Mechanical Pump and motor Motor Parts or components subject to wear Converter seal bearings winding...
11.1 Error table Reaction Time before time consideration Waiting Waiting time before of the defects Faults time before automatic Remedies error defect, over 24 Possible causes before restart signalisa- after hours reset tion signalisation...
11.3 Other defaults Defaults Possible causes Remedies WARNING! CAUTION! 12. Spare parts Subject to technical alterations!
Page 35
Korea Bombas Wilo-Salmson Vietnam Burton Upon Trent DE14 2WJ 4050-040 Porto (Madrid) T +55 11 2923 (WILO) T +82 51 950 8000 T +351 22 2080350 T +34 91 8797100 9456 T +44 1283 523000 T +84 8 38109975 May 2013...
Page 36
WILO SE Nortkirchenstraße 100 D-44263 Dortmund Germany T +49(0)231 4102-0 F +49(0)231 4102-7363 wilo@wilo.com Pioneering for You www.wilo.com...
Need help?
Do you have a question about the Wilo-MVIE Series and is the answer not in the manual?
Questions and answers