To Copy A Pcr Step; To Add Or Delete A Pcr Step; To Delete A Pcr Program - Agilent Technologies SureCycler 8800 Setup And User Manual

4 PCR Programs

To copy a PCR step

To copy a PCR step
1 Go to the programming screen for the program.
2 In the Program Window, press the step to be copied to select it.
3 Press the copy button (shown below).

To add or delete a PCR step

• Go to the programming screen for the program, then:

To delete a PCR program

1 From the Home screen, press Programs.
2 Press the program to be deleted to select it.
3 Press Delete to remove the program from the folder.
54
• To add a new step, press a command on the Command List to select
it and then press the forward arrow button. You will be prompted to
enter the parameters for the new step. See
Commands List"
particular command.
• To delete a step from the program, press the command in the
Program Window to select it and then press the delete button (shown
below).
• To save your changes to the program, press Save. You can save the
program under the existing name or give the file a new name.
Depending on your user level (Guest or registered user), the specific
user directory or Guest directory is displayed listing all existing PCR
program files.
on page 43 for details on parameters for a
Agilent SureCycler 8800 Setup and User's Guide
"Program Steps in the