Safety; Safety Symbols - Siemens L-852A-D Dualite Manual

Type L-852A-D Dualite Bidirectional Taxiway Light Fixtures
Type L-850A Dualite Bidirectional
Runway Light Fixture

1. Safety

Safety Symbols

© 2001 Siemens Airfield Solutions, Incorporated
All rights reserved
This section contains general safety instructions for using your Siemens
Airfield Solutions equipment. Some safety instructions may not apply to
the equipment in this manual. Task- and equipment-specific warnings are
included in other sections of this manual where appropriate. Note all
warnings and follow all instructions carefully. Failure to do so may result
in personal injury, death, or property damage.
To use this equipment safely,
•
refer to the FAA Advisory Circular AC 150/5340-26, Maintenance of
Airport Visual Aids Facilities, for instructions on safety precautions.
•
observe all safety regulations. To avoid injuries, always remove power
prior to making any wire connections and touching any parts. Refer to
FAA Advisory Circular AC 150/5340-26.
•
read and become familiar with the general safety instructions provided
in this section of the manual before installing, operating, maintaining,
or repairing this equipment.
•
read and carefully follow the instructions given throughout this
manual for performing specific tasks and working with specific
equipment.
•
store this manual within easy reach of personnel installing, operating,
maintaining, or repairing this equipment.
•
follow all applicable safety procedures required by your company,
industry standards, and government or other regulatory agencies.
•
obtain and read Material Safety Data Sheets (MSDS) for all materials
used.
Become familiar with the safety symbols presented in this section. These
symbols will alert you to safety hazards and conditions that may result in
personal injury, death, or property and equipment damage.
WARNING: Failure to observe this warning may result in
personal injury, death, or equipment damage.
WARNING: Risk of electrical shock. Failure to observe this
warning may result in personal injury, death, or equipment
damage.
96A0149E
Issued 5/01
Safety
Page 1